Technical Data
| Function |
2 Way, 3 Way NC, NO |
| Pressure range |
• See table
• Valves for pressure higher than 25 bar
cannot be supplied with manual override. |
| Kv (l/min) |
See table |
| Temperature range |
Fluid : -10ºC to 80ºC (no freezing)
Ambient : -10ºC to 50ºC |
| Mounting |
Vertical, on sub-base, 2 screws M4.
Any number of valves on the same sub-base
plate. Any combination of 2/2, 3 Way NC or NO
valves may be grouped together.
* Standard valve orientation : Manual override
and base port on the same side |
Materials in contact
with media |
Manual override:
Plastic, Brass screw or finger knob.
NOa* – manual override is not available.
*pressure is supplied through the base
Main Valve:
Mazak, Brass
Solenoid Operator:
Stainless Steel AISI 300 & 400 series
Seals:
NBR, FKM, EPDM |
| Media |
Air, water, oil |
| Coil voltage |
• Voltage and power consumption – see table
• All Baccara coil voltages are ± 10% of nominal |
| Standard / Certification |
• UL 429
* Available on selected models only.
Please contact our technical sales
department for details. |
| Standard protection class |
IP65 with connector
* Option : IP68 (please refer to GEM-BP Coil) |
• Latch valves are available upon request.
• Pressure separation plug is available.
| Size |
Any number of stations, built from three basic components:
left end section, right end section and middle section. |
| Assembly |
Push in and turn 90º clockwise |
| Port size |
1/8″ BSP |
| Material |
Mazak, Brass |
Max. Pressure (bar) 2W, 3W NC table
Coil
Current/Power |
Orifice (mm) |
| 0.8 |
1.2 |
1.6 |
2.0 |
2.4 |
3.0 |
| ADC • |
23 |
20 |
15 |
10 |
8 |
5.5 |
| AC8W, DC10W |
35 |
30 |
17 |
14 |
10 |
6 |
| AC5.5W |
23 |
20 |
15 |
10 |
8 |
5.5 |
AC2.5W, DC5.5W,
DC3.5W |
20 |
16 |
10 |
9 |
5 |
4 |
| Flow factor Kv(l/min) |
0.6 |
1.1 |
1.7 |
2.5 |
3.5 |
4.5 |
Max. Pressure (bar) 2W, 3W NO table
Coil
Current/Power |
Orifice (mm) |
| 0.8 |
1.2 |
1.6 |
2.0 |
2.4 |
3.0 |
| ADC • |
25 |
20 |
15 |
11 |
8 |
6 |
| *AC8W, DC10W |
30 |
22 |
17 |
12 |
10 |
7 |
| *AC5.5W, DC5.5W |
25 |
20 |
15 |
11 |
8 |
6 |
| *AC2.5W, DC3.5W |
20 |
18 |
12 |
8 |
6 |
4 |
| Flow factor Kv(l/min) |
0.6 |
1 |
1.4 |
2.2 |
3.0 |
3.5 |
* These are not applicable for NO through base valves
• ADC valves are only suitable for use with AC8W or DC10W coils.
Voltage & Power Consumption

• Available options
Reviews
There are no reviews yet.