MAIR100 / MAIR200 / MAIR300 | Precision Regulator with bracket and gauge

The pressure regulator adjusts the pressure continuously to a stable level, even when the input pressure varies. The level can be adjusted between 0.05 – 10 bar. Please note that the maximum flow rate alone doesn’t provide enough information to properly size your pressure regulator. Use the flow curve to determine if the pressure drop (droop) within your expected flow rate range is acceptable. The flow curve shows the flow rate for a set input pressure with multiple output pressures. For each output pressure, it can be seen how the pressure changes with increasing flow rate. It is recommended to use the device in the flat range of the curve, and not on the beginning or the end of the curve. The output pressure can be adjusted by pulling the hand wheel up and twisting. The output pressure can be locked after adjustment by pushing the hand wheel back in. The max input pressure is 10 bar and the temperature range is between -5 and 60 °C. It has a built-in pressure relief valve. The housing material is made out of aluminium. It has a mounting bracket to mount it to a wall or your machine.

Pros:

• Regulates the output pressure to a constant, precise and stable level for optimal performance of downstream equipment
• It has a built-in pressure relief valve
• It has a mounting bracket to mount it to a wall or your machine